Requirements for module advertising sizes in the "RZD-Partner" magazine
| 1) Full page | |
 | A) If an advertising module should have white margins, its size must be not less than 210 x 290 mm. There should be left not less than 15 mm from each edge for margins, or model centering on the page will be difficult to achieve. That is why the size of a model will be 200 mm x 280 mm. B) If an advertising module is going to be bled off, could you please add 3mm to each side, for cutting this area, i.e. model size is to be 216ìì X 296ìì.PLEASE, don't place any important information on this cutting area!!! |
| 2)1/2 of the page | |
 | A) If an advertising module should have white margins, its size must be less than 210 x 145 mm. There should be left not less than 15 mm from each edge(BUT THE TOP AND BOTTOM ONES) for margins, or model centering on the page will be difficult to achieve. That is why the size of a model will be 190 mm x 145 mm. |
 | B) If an advertising module is going to be bled off, could you please add 3mm to each side, for cutting this area, i.e. model size is to be 216ìì X 148ìì.PLEASE, don't place any important information on this cutting area!!! |
| 1/4 of the page. | |
 | Advertising module must be 105ìì X 145ìì. |